"Smart intersection" is less the name of a product than of parts working together. In our description three things come together: the demand measured on each approach, the controller that sets the green from it, and a central layer that runs intersections together, joined by a communication link and carried out by the signal equipment on the poles. This post lists the parts in order and points to the detailed post for each. The solution is introduced on the adaptive intersection control page.
Detection
The intersection learns how many vehicles wait on each approach from detectors: inductive loop, radar, video or pedestrian push-button. The camera-based one is İRİS: a processing unit at the roadside analyses live IP camera video, detects vehicles, pedestrians and bicycles in zones drawn on the camera image, actuates the controller's detector inputs over SNMP/NTCIP, and records counts, density and number plates. All processing runs on site, with no cloud connection. How it differs from a loop is in the virtual loops post; which camera does which job is in the camera post.
The controller
The ANTRA intersection controller runs the signal program, the phase sequence and the independent safety unit. It runs in four modes: fixed-time, vehicle-actuated, coordinated and adaptive; which one is used is set per site and per hour. The controller's internal structure is in the controller post and the difference between the four modes in the adaptive signal control post.
The pedestrian side
The pedestrian call is part of the intersection: a touch button, an in-ground platform, or camera-based pedestrian detection. How the signal state is given by sight and by sound is in the pedestrian crossing post; the units that show the time remaining are in the countdown post.
The central layer
ROTA brings a city's intersection controllers, detectors, cameras and variable message signs into one web interface, where they are monitored, configured, coordinated and analysed. Corridor coordination and the green wave run in this layer (the green wave post). The controller does not wait for the centre to decide each green; the signal program and the detection run at the intersection.
The link between the controller and the centre
The controller and the central layer exchange data over NTCIP 1202 and NTCIP 1201, carried by SNMP. How the centre uses this link is described in the intelligent traffic management system post. Over this link the centre reads each controller's state and writes configuration to it. A fault the controller logs is reported through the standard NTCIP 1202 event log, so any NTCIP-compliant platform can read it, not only ROTA. The signal program runs in the controller, so the link carries monitoring, configuration and coordination, not the decision on each green.
The ANTRA product documents list these connections:
- 3G modem: remote programming
- HEPI modem card (optional): access from a central control room or from a PC
- USB-RS485, tablet PC USB, and Wi-Fi from a phone or PC: programming at the cabinet
A controller from another manufacturer that does not speak NTCIP is connected through the controller retrofit module, over a serial, RS-485, Ethernet or digital I/O interface.
Equipment at the junction
- Signal heads: 100, 200 and 300 mm, with 5 mm LED or Power LED (signal head post)
- Countdown units: show the time left before the light changes (countdown post)
- Pedestrian push buttons: touch detection, sound guidance, Braille and vibration feedback (push button post)
- Uninterruptible power supply: an outdoor UPS in its own cabinet, with the controller monitoring the mains (UPS post)
Functions on the same platform
- Red-light violation detection: watches the signal channel status, records a vehicle that crosses the line while red as a violation, and reads the plate
- Transit priority
- Adaptive intersection control
- Variable message signs
Questions
What parts make up a smart intersection?
Detection on each approach, an intersection controller, the pedestrian call, a link to a central layer, and the signal equipment on the poles.
How does the controller talk to the traffic centre?
Over NTCIP 1202 and NTCIP 1201, carried by SNMP. On ANTRA the connection is a 3G modem or the optional HEPI modem card.
Does the intersection wait for the centre to decide each green?
No. The signal program and the detection run in the controller; the centre monitors, configures and coordinates intersections.
Can a controller from another manufacturer be connected?
If it speaks NTCIP, the central layer reads it directly. If it does not, the controller retrofit module connects it over a serial, RS-485, Ethernet or digital I/O interface.
What this post does not say
This post gives no improvement result; our product documents contain no measured delay or speed result.