Detecting a vehicle at a junction is not one job. The controller wants to know which approach has vehicles waiting; the traffic engineer wants counts and speed per lane; a centre wants the plate and the type of vehicle; the operator wants to see the junction as a whole. In the İRİS family each of these has its own camera. The software and the controller side, where a virtual zone takes the place of a loop, was described in the virtual loops post; this post covers the cameras.
A detection camera for one approach
The İRİS directional vehicle detection camera watches a single junction approach. It turns what it sees into measurable traffic data: vehicle presence, counts and occupancy per direction. That data feeds the adaptive intersection controller. The lens is varifocal and there is day/night imaging; no sensor is cut into the road surface.
Per-lane traffic data
The İRİS traffic flow camera is a 4 MP video detection camera. It tracks every vehicle on up to 6 lanes in both directions and reports, per lane, at intervals from 1 to 3,600 s:
- Traffic volume and speed
- Vehicle type
- Time and space headway
- Time and space occupancy
- Queue length and traffic status
Two virtual detection zones per lane, with adjustable position, output a signal when a vehicle enters or leaves them, replacing induction loops. The number of stopped vehicles in a defined area is also detected.
Plate, vehicle attributes and incidents
The İRİS dual-sensor intersection monitoring camera has two 4 MP cameras in one housing: channel 1 (8–32 mm) shows the panorama of the approach and channel 2 (10–50 mm) the detail. It reads number plates and recognises vehicle type, colour and make on up to 3 lanes at 5–120 km/h, produces traffic flow data and detects incidents such as congestion, stopped vehicles and wrong-way driving. For the plate-reading job alone there is the İRİS ANPR camera, described in the ANPR post.
The junction as a whole
The İRİS IP speed dome gives the operator a steerable view of the whole junction for monitoring, remote observation and operational control. 25 times optical zoom and 150 m infrared illumination keep it usable day and night, and 300 stored presets let it return to a known view. It can also follow the leg the intersection is currently serving.
Choosing by the question
- Is there a vehicle on this approach? The directional vehicle detection camera
- How many vehicles, how fast, per lane? The traffic flow camera
- Which plate, which type, colour and make? The dual-sensor camera, or the ANPR camera
- What is happening at the junction now? The speed dome
The units that process the video on site are the İRİS camera processor and the video detection controller; both produce counts and density without sending video to the cloud.