A pedestrian push button tells the intersection controller that someone is waiting to cross. An accessible push button does this in a way that also works for a person who cannot see the signal head, or sees it poorly: it responds to touch, guides by sound and gives information through a tactile surface. This post describes how the Tactus accessible pedestrian button combines the three.
Who the button serves
TS ISO 23600 is the standard for acoustic and tactile signals at pedestrian traffic lights, used by people with vision impairments. Tactus gives the acoustic and tactile signals that standard covers. It is intended for crossings on busy, high-speed roads that have no overpass or underpass.
Telling the controller a pedestrian is waiting
A touch on the button sends a pedestrian call to the intersection controller. The controller places the call in the running signal plan, against the minimum green, the intergreen and the conflicting vehicle movements. The pedestrian signal then shows the walking figure, the clearance interval runs, and the crossing returns to the standing figure.
In the smart pedestrian crossing system, Tactus is one of three ways to call the crossing; the others are a weight-sensing button set into the footway and camera-based pedestrian detection.
Sound
The button gives a locator tone, a crossing sound and voice guidance. The locator tone is the acoustic signal that lets a person find the button. For voice guidance, a human voice or a robot voice can be chosen.
The volume adjusts automatically to the ambient noise, or can be fixed. The range is 30 dB(A) to 90 dB(A) at 1 m. The button has a night mode.
Touch and tactile feedback
Detection is by a touch sensor, which responds to a light tap, also with gloves.
- A Braille plan of the intersection on the left of the button
- A Braille description on the right
- Optional vibration feedback
- Optional custom screen
Housing and power
The housing is UV-stabilised polycarbonate, with IP65 ingress protection and IR3 impact resistance. It measures 39 × 13 × 13 cm and weighs 1.9 kg, and fits 102 mm and 114 mm poles through a rubber adapter.
- Operating voltage: 170–265 VAC or 24 V DC
- Power consumption: under 5 W
- Operating temperature: −40 °C to +60 °C
- Humidity: below 95%
- Configuration: computer and Android interfaces
Other parts of the crossing
A separate audible warning device for pedestrians can be fitted beside the button. It announces the crossing state by sound, adapts its level to the ambient noise, and shares the Tactus housing and the −40 °C to +60 °C operating range.
The Zeminmatik LED pedestrian paving stone repeats the signal state on the road surface at the crossing. It runs on 24 V DC, connects over RS485, carries a static load above 50 tonnes and is protected by cast resin.
Standards and law
The product documents reference TS ISO 23600, EN 50293 (electromagnetic compatibility of road traffic signal systems) and Turkish Law No. 5378 on Persons with Disabilities. The TS ISO 23600 certification of Tactus was announced in 2023 in this news item; its press coverage is described here.