
Pedestrian crossing systems with traffic signals
A pedestrian crossing built from a call device, a pedestrian signal, an audible warning device, LED paving stones and the intersection controller that holds the crossing phase. Supplied for a single crossing or as part of a junction.
What is a smart pedestrian crossing?
A smart pedestrian crossing is a signal-controlled pedestrian crossing in which the pedestrian call, the stop and walk indication, the audible and tactile guidance and the lit road surface are all driven by one intersection controller.
Pedestrian push buttons, in-ground call platforms, pedestrian signal heads with standing and walking figures, countdown timers, audible warning devices for pedestrians, LED paving stones and GPS-dimmed signal poles connect to an ANTRA intersection controller.
- Call methods
- Push button, in-ground platform, camera
- Signal modules
- 100, 200 and 300 mm
- Audible level
- 30 dB(A) to 90 dB(A) at 1 m
- Tactile guidance
- Braille plan, Braille description, vibration
- Road surface
- LED paving stones, above 50 tons static
- Controller
- Antra-G4: 2 vehicle and 2 pedestrian phases
How a pedestrian crossing signal works
- Call — A pedestrian registers a call at the push button, at the in-ground platform, or through camera-based detection.
- Evaluation — ANTRA places the call in the running signal plan, against the minimum green, the intergreen and the conflicting vehicle movements.
- Walk — The pedestrian signal shows the walking figure. Where fitted, the countdown timer shows the remaining time and the LED paving stones light the crossing.
- Clearance — The clearance interval runs: the countdown reaches zero and the audible signal ends.
- Stop — The crossing returns to the standing figure and the controller resumes the vehicle phases.

Three ways to request a pedestrian crossing
TACTUS accessible pedestrian button
Touch sensor with contactless detection, mounted on 102 mm and 114 mm poles through a rubber adapter.
Ground pedestrian button
Weight sensor set into the footway surface. No device on the pole.
Camera-based pedestrian detection
An optional ANTRA module, listed as a push-button alternative.
What the crossing shows the pedestrian
- Standing and walking figure
- Animated pedestrian figure
- Integrated countdown
- Separate countdown timer
- 2-digit and 3-digit displays
- 100, 200 and 300 mm modules
- 5 mm LED and Power LED
- Red and green "STOP"–"PASS" figures
- Figures redrawn for the authority or region
- Automatic night dimming
- Red and green duration memory
Accessibility at the pedestrian crossing
- Sight
- Red standing and green walking figures, animated figures, a countdown to zero, and LED paving stones lighting the crossing at road level.
- Sound
- Position sound and crossing sound, human voice or robot voice, level set automatically against ambient sound or fixed, 30 dB(A) to 90 dB(A) at 1 m. A separate audible warning device for pedestrians is available.
- Touch
- A touch sensor with contactless detection, a Braille intersection plan on the left of the button and a Braille description on the right, and optional vibration.
The TACTUS pedestrian button is certified to TS ISO 23600.
LED road surface and signal poles
Zeminmatik LED paving stone
An LED paving stone set into the road surface at the crossing. 24 V DC, RS485, a response time of 100 ms, a static load resistance above 50 tons, cast resin protection, and red, yellow, green and white 5 mm ultra-bright LEDs in a UV-resistant polycarbonate body.
GPS-dimmed LED signal poles
The night-mode card uses satellite data to calculate sunset and sunrise and switches between day and night brightness. Overhead ALGPS-2b at 4.5 m with a 4.7 m overhang, standard ALGPS-1 at 3.5 m, both aluminium with a UV-protected polycarbonate lens.

What the pedestrian crossing is built from
Pedestrian call
The device a pedestrian uses to register a call.
Pedestrian indication
The signal heads and countdown timers that show stop, walk and remaining time.
- Sarix™ Q200 PEDESTRIAN TRAFFIC LIGHT WITH 5MM LEDS
- Sarix™ Q200 STANDING & WALKING PEDESTRIAN FIGURE TRAFFIC LIGHT WITH 5MM LEDS
- Sarix™ Q200 ANIMATED PEDESTRIAN TRAFFIC LIGHT WITH 5MM LEDS
- Galaxy™ Q200 PEDESTRIAN TRAFFIC LIGHT WITH POWER LED-TRANSPARENT GLASS
- Sarix™ Q200 COUNTDOWN TIMER AND ANIMATED PEDESTRIAN TRAFFIC LIGHT WITH 5MM
- Sarix™ Q300 COUNTDOWN TIMER TRAFFIC LIGHT WITH 5MM LEDS
Audible warning
The audible warning device for pedestrians, separate from the button.
Road surface and poles
The LED paving stones and the signal poles that carry the heads.
Intersection control
The controller that holds the crossing phase and its timing.
Specifications
A pedestrian crossing is the smallest of the three ANTRA reference geometries. Larger junctions scale up through the G-Series to 32 signal group outputs.
- Model
- Antra-G4
- Signal group outputs
- 4
- Vehicle phases
- 2
- Pedestrian phases
- 2
- Typical application
- Pedestrian crossings, simple junctions
Optional modules across all models
- Pedestrian push-button application
- Countdown and arrow add-on modules
- Camera-based pedestrian detection
Frequently asked questions about pedestrian crossings
Does the TACTUS pedestrian button need to be pressed?
No. It uses a touch sensor with contactless detection.
Can a pedestrian crossing work without a button?
Yes. A ground pedestrian button detects by weight, and camera-based pedestrian detection is an ANTRA option.
Is the pedestrian crossing accessible to visually impaired pedestrians?
The button carries a Braille intersection plan and a Braille description, position and crossing sounds, and optional vibration. It is certified to TS ISO 23600.
Does the LED paving stone carry vehicle traffic?
Its static load resistance is above 50 tons, in a cast resin protection.
Can the walking figure be redesigned?
The "STOP"–"PASS" figures can be redrawn for the authority or the region, and are lit red and green.
Which ANTRA model does a pedestrian crossing need?
Antra-G4 — 4 signal group outputs, 2 vehicle phases and 2 pedestrian phases.
Integration with ANTRA and ROTA
The crossing is run by an ANTRA intersection controller. Where a city operates ROTA, that controller and its crossing appear in ROTA over NTCIP, alongside the rest of the network. Camera-based pedestrian detection is supplied through İRİS.
Related solutions
Contact us about a pedestrian crossing
Send the crossing location, the number of crossings and whether a controller is already installed.