A traffic light with a countdown timer shows, as a number, the time left before the signal changes. Our catalogue has microprocessor-controlled Sarix countdown units with 5 mm LEDs for this. This post describes the formats and how the unit keeps the time.
Three formats
- Sarix Q200 countdown timer: 200 mm, two-digit (88) display, 140 LEDs
- Sarix Q300 countdown timer: 300 mm, three-digit (188) display, 148 LEDs
- Sarix Q300 three-digit (188) countdown timer: 300 mm, stores the red and green durations separately and shows the remaining time to three digits
- Sarix Q200 countdown and animated pedestrian signal head: shows the walking pedestrian figure and the remaining time on one face
The first three give the remaining time on a separate number face. The fourth combines the number with the pedestrian signal's figure on one face.
How it keeps the time
The unit is microprocessor-controlled. Its memory feature stores the signal duration in memory and updates it as the duration changes, holding the red and green durations separately. So when the plan in the controller changes, the time the countdown shows follows the changed duration.
Night mode
In night mode (LDR, a light-dependent resistor) the unit dims its light output by 40% to prevent glare for drivers. Dim work is optional.
Housing
- UV-stabilised polycarbonate housing, black, grey or orange
- IP65 ingress protection, IR3 impact resistance, vibration class AJ3
- Operating temperature −40 °C to +70 °C
- Electromagnetic compatibility: EN 50293
The records carry the same lines as the signal heads; what each of them means is explained in the datasheet post.