Skip to content
Home/Blog/Audible and tactile signals at a pedestrian crossing: calling, showing and sounding are separate jobs

Audible and tactile signals at a pedestrian crossing: calling, showing and sounding are separate jobs

A pedestrian signal is mostly information carried by colour and a figure: wait or cross. For a pedestrian who cannot see the signal head, or sees it poorly, the same information has to arrive another way. Rather than loading that onto one device, it helps to split the crossing's work in three: telling the controller that someone is waiting, showing the state of the crossing, and giving that state by sound or touch. Each job has its own product. For a post about the button alone, see the accessible pedestrian push button post.

Calling the crossing

The call is the first step, which passes the fact that a pedestrian is waiting to the intersection controller. Two products do this differently.

  • The Tactus accessible pedestrian button gives the call through a touch sensor, and also gives an acoustic locator tone and audible warnings. The person who starts the call has to find the button; the locator tone is there for that.
  • The in-ground pedestrian call platform sits flush in the pavement. It detects a pedestrian waiting briefly on it and passes the crossing request to the controller. Because it needs no button press it allows hands-free use, and its raised yellow surface resists slipping when wet.

In the smart pedestrian crossing system, camera-based pedestrian detection is added to these two; the three are the call options of the same crossing.

Showing the state

The state of the crossing is shown on the pedestrian signal head. Standing-and-walking-figure heads give it as a figure. The Sarix Q200 animated head with a countdown timer shows the walking figure and the remaining time on one face, under microprocessor control. This information is read by sight.

Telling the state to a person who cannot see

The audible warning device for pedestrians announces the state of the crossing by sound. Its level adjusts automatically to ambient noise, it has a night mode, vibration is optional, and it is configured from a computer and an Android interface. The Tactus button joins sound and tactile information in the button body; the separate warning device announces the state of the crossing by sound.

Repeating the state on the ground

The Zeminmatik LED pedestrian paving stone repeats the signal state on the road surface, where the pedestrian is already looking. It is protected by cast resin, carries a static load of more than 50 tonnes and connects over RS485. It is a second visual layer, independent of the signal head.

Choosing the parts together

  • Who gives the call, and how: by touch (Tactus) or by waiting (in-ground platform)
  • How the state is seen: figure, countdown, paving stone
  • How the state is known without sight: locator tone and audible warning, optional vibration
  • How it all talks to the controller: the buttons and the audible device are programmed from a computer; the paving stone uses RS485

This list is not an installation specification. Voltage, temperature and protection values should be taken from the datasheet of the product concerned.

Standards

TS ISO 23600 is the standard for the acoustic and tactile signals of pedestrian signals used by people with vision impairments. The Tactus certification was announced in 2023 in this news item. The countdown head's electromagnetic compatibility class is EN 50293.

Products in this post