Skip to content
Home/Blog/How to read a traffic signal datasheet: TS EN 12368, IP65, IR3

How to read a traffic signal datasheet: TS EN 12368, IP65, IR3

Our traffic signal head datasheets list the same lines in the same order. This page goes through them: what each line is called, what our heads show on it, and which of our posts explains the quantity behind it. The values are those printed in our catalogue and on the product pages; they differ by model, so the product page is the reference for a given head.

The strip at the foot of the catalogue page

Each catalogue page for signal heads ends with a strip of five items: TS EN 12368, IP65 (Ingress Protection), IR3 (Impact Resistance), 5 years (Warranty) and ISO 9001. The standard also appears in product names, for example the Sarix red signal head module (EN 12368, Q200MLMR / Q300MLMR). The certificates themselves, with the dates printed on each, are on the Quality Certificates page.

Housing lines

  • Lens size: 100, 200 or 300 mm.
  • Housing: UV-stabilised polycarbonate, black, grey or orange.
  • Lens colour: grey, transparent or coloured.
  • Ingress Protection: IP65.
  • Impact Resistance: IR3.
  • Vibration: Class AJ3.
  • Operating temperature: −40 °C to +70 °C.
  • Humidity: below 95%.

Electrical lines

  • Operating voltage: 170–265 V AC, 50 Hz; 12–24 V DC is also listed on the vehicle and pedestrian heads.
  • Minimum shutdown voltage: 90 V (80 V on the Q100 pedestrian head).
  • Reaction on/off: under 50 ms.
  • EMC: EN 50293.
  • Power factor: above 0.9.
  • A limit for total harmonic distortion is listed.

What power factor and harmonic distortion mean is explained in The Effects of Power Factor and Harmonic Distortion on the Traffic Signalling System.

Optical lines

  • Luminous intensity: the catalogue table gives a minimum of 200 cd and a maximum of 400 cd for RGB; the product pages also give it as a type code — for example Type W A3/1 and B3/2 on the Galaxy Q200 vehicle head, Type M A3/1 and A3/2 on the Sarix Q300. The codes are quoted as printed in the catalogue.
  • Light distribution: 1/2.5.
  • Signal symbol: S1–S2.
  • Colour spectrum: red 613.5–631 nm, yellow 585–597 nm, green 498.5–508 nm.
  • LED quantity: 6 on the Galaxy Q200 vehicle head (Power LEDs), 251 on the Sarix Q300 vehicle head (5 mm LEDs).
  • Dim work: optional.

Phantom class measures how much a signal head looks lit when it is not, when sunlight falls on it. The class is set by the Is/Iph ratio; a ratio above 16 is class 5, the best value. The General Directorate of Highways (KGM) requires at least class 3 in its specifications. A grey-transparent lens reduces the effect but also absorbs part of the source light. More in Phantom Effect in Traffic Signals: Is/Iph Ratio and Phantom Classes.

The difference between 5 mm LEDs and Power LEDs is compared in Comparison of 5 mm Multi LED Signal Light and Power LED Signal Light: a 300 mm lamp is built with roughly 200 5 mm LEDs or with 3 to 6 Power LEDs.

Where the lines are on a product page

Product pages group these lines under Technical Specifications. The models named here:

The history of the move to LEDs in signal heads is in Traffic Light History: From Incandescent and Halogen Lamps to LEDs.